Product Info

4.3 Copy Set

The Copy Set function allows the user to copy the sensor ID from an existing sensor, and program them to an aftermarket sensor.

Select the sensor brand you are working with,

then select “Set”.

Select “Copy” The tool will display a table to copy multiple

sensors. Place the tool’s antenna next to the

sensor you wish to copy, and tap copy.

1 2 3

The existing sensor’s ID will be displayed.

Place the new sensor above the tool’s

antenna, and tap program.

The tool will begin programming the sensor.

This process may take a few moments.

Once successfully programmed, the tool

will display the sensor’s ID, pressure, and

temperature.

4 5 6

Note: Sensors can be copied and programmed in any order. It is not necessary to Copy, then Program each sensor in succession.