Product Info

4.4 Retrieve ID

The Retrieve ID function allows the user to pull the sensor IDs from the vehicle’s ECU via the OBDII cable, and program them to

an aftermarket sensor.

Select the sensor brand you are working with,

then select “Retrieve ID”.

Ensure the OBDII Cable is connected to the

tool and vehicle with the ignition in the ON

position, Then tap “Retrieve IDs”

The tool will begin retrieving the IDs from the

vehicle.

1 2 3

Once retrieved, the tool will display a table

with all of the existing IDs stored in the

vehicle. Place the new sensor above the

tool’s antenna, and tap program.

The tool will begin programming the sensor.

This process may take a few moments.

Once successfully programmed, the tool will

display “Successfully Programmed”.

4 5 6

Note: Sensors can be programmed in any order. It is not necessary to program each sensor in succession.