Full Product Manual

ASSEMBLING THE BLOWER TUBE(
See Figure 2.
)
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
1. Align either of the grooves on the tube with the tabs on the blower housing. Push the tube onto
the blower housing until the tab engages the grooves
(
See Figure 2.1.
)
2. Turn the tube in the direction of the arrow until both of the tabs slide into the lock positions.
(
See
Figure 2.2.
)
ASSEMBLY
10
Fig. 2.1
Fig. 2.2
Tab
Tube
Groove
Lock position
LockUnlock
Not for Reproduction