Full Product Manual

STARTING/STOPPING THE BLOWER (

See Figure 4.

)

• Ensure that the battery is installed in the blower.

• To start the blower, press the On/Off Button located on the blower. You will hear two audible

beeps signaling the blower is active.

• Squeeze the trigger to start the blower.

• Release the trigger to stop.

ADJUSTING THE AIR VELOCITY (

See Figure 5.

)

• Ensure that blower is blower is on. The LED above the On/Off Button will illuminate.

• Squeeze the trigger to start the blower.

• Once the blower is on, pull back the lever clockwise to increase the speed. This will lock the

speed at the desired setting.

• To decrease the speed, push the lever counter clockwise to decrease the speed to the desired

setting.

NOTE: If you decrease the speed all the way, the unit will shut off and step one will need to be

repeated.

OPERATING THE BLOWER

• To keep from scattering debris, blow around the outer edges of a debris pile. Never blow

directly into the center of a pile.

• To reduce sound levels, limit the number of pieces of equipment used at any one time.

• Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen

surfaces when water is available.

• Conserve water by using power blowers instead of hoses for many lawn and garden

applications, including areas such as gutters, screens, patios, grills, porches, and gardens.

• Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely

away.

• After using blowers or other equipment, clean up. Dispose of debris properly.

OPERATION

On/Off

Button

Cruise

Control

Lever

Trigger

Fig. 4

Fig. 5

Not for Reproduction