Use and Care Manual

9
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLES DESIGNATION EXPLANATION
V Volts Voltage.
A Amperes Current.
Hz Hertz Frequency(cycles per second)
W Watts Power
hrs Hours Time.
n
o
No Load Speed Rotational speed, at no load
/ min Per minute Revolutions, strokes, surface speed, orbits etc., per minute
Lithium-ion Battery
Recyling
Designates that this tool is in compliance with
Lithium-ion battery recylcing program requirements
Safety Alert Symbol Precautions that involve your safety
Read the instruction
Manual
To reduce the risk of injury, user must read and understand
the instruction manual before using this product
Eye Protection Wear eye protection when operating this equipment.
Wear Ear Protection Wear ear protection when operating this equipment.
Gloves
Wear non-slip, heavy-duty protective gloves when handling
the chainsaw and the blade
Kickback DANGER! Beware of kickback
Operate With Two
Hands
Hold and operate the saw properly with both hands
One Handed Do not operate the saw using only one hand
Bar Nose Contact Avoid bar nose contact
Keep Bystanders
Away
Keep all bystanders at least 50'(15m) away
Class II Construction
Wet Conditions Alert
Double-insulated construction
Do not expose to rain or use in damp locations
Not for Reproduction