Undercounter Ice Maker INSTALLATION & MAINTENANCE SK-89/129/169/219/289 GLACE BAY ENTERPRISES INC | [Company address]www.snookerice.
Self-Contained Ice Maker User Manual for Installation and Maintenance Commercial Ice Maker User Manual for Installation and Maintenance GLACE BAY ENTERPRISES INC www.snookerice.
Self-Contained Ice Maker User Manual for Installation and Maintenance 12.1.0028-01 B GLACE BAY ENTERPRISES INC www.snookerice.
Self-Contained Ice Maker User Manual for Installation and Maintenance Table of Contents Important Information ....................................................................................................................... 1 Warning and safety instruction ......................................................................................................... 2 General ....................................................................................................................................
GLACE BAY ENTERPRISES INC www.snookerice.
Self-Contained Ice Maker User Manual for Installation and Maintenance Important Information Please pay attention to the following warning labels on the ice maker There is a risk of serious mechanical injury. The label indicates a flammable foaming agent “Cyclopentane” used. There is a risk of fire. The label indicates a hazardous voltage. There is a risk of electric shock. The label indicates a flammable refrigerant “R290” used. There is a risk of fire.
Self-Contained Ice Maker User Manual for Installation and Maintenance Warning and safety instruction substances in this ice machine, or it may result in explosion or fire. Do not store any sundries, or freeze any food in the storage bin. Keep the ice scoop clean. The ice machine must be placed on the floor sufficient to supports its weight. Insufficient base may cause the equipment fall over and cause injury. There should be sufficient ventilation space around the ice machine. Keep good ventilation.
Self-Contained Ice Maker User Manual for Installation and Maintenance oor the ice maker with flammable refrigerant R290: DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. MUST BE ENOUGH VENTILATION SPACE AROUND THE ICE MAKER TO KEEP THE VENTILATION SMOOTH. DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. DO NOT USE MECHANICAL DEVICES TO DEFROST REFRIGERATOR. DO NOT PUNCTURE REFRIGERANT TUBING. DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED.
Self-Contained Ice Maker User Manual for Installation and Maintenance Schematic Diagram of Installation 4
Self-Contained Ice Maker User Manual for Installation and Maintenance Installation Steps 1. Check if the ice machine is in good condition and the accessories are complete; check the machine model and the machine nameplate. 2. Open the bin door and remove the packaging tape from the ice thickness sensor and the flap. They are used to avoid possible damage during transportation only. 3. Clean the ice storage bin and the food area inside with a sponge soaked in warm water and soda.
Self-Contained Ice Maker User Manual for Installation and Maintenance the water pump is turned off, the defrosting valve is turned on, and after the hot gas enters into the evaporator for about 1-2 minutes, the ice cubes slides from the evaporator into the storage bin. Startup: after proper installation, connect the water source and turn on the power supply, the machine will start working. Please confirm that the machine is operating normally when you turn it on for the first time.
Self-Contained Ice Maker User Manual for Installation and Maintenance Instruction of Control Panel 1. LED Display: Self-check: Display “ini” code. Preparing: Counting seconds positively. Ice making: Counting seconds positively prior the water reaching 0 degree C. Counting seconds down to 0 s after. Ice Harvest: Counting seconds positively. Clean: Display “CLE” during cleaning and sterilizing;Display “rin” during rinsing. 2. LED Lamps: Lights on during the related process. 3.
Self-Contained Ice Maker User Manual for Installation and Maintenance Maintenance soft brush or a vacuum cleaner with a brush to brush it up and down along the fin direction, to avoid damage to the fins and further affecting the cooling effect. The condenser filter should be cleaned every 2 weeks. Note: Maintenance must be done by a qualified professional personal. Warning: Before maintenance or manual clean, be sure to cut off the water source and power supply.
Self-Contained Ice Maker User Manual for Installation and Maintenance Service Call If the ice machine works abnormally, please ✓ whether the panel display does not display confirm below before making a service call: the OFF standby state; 1. Check the water supply ✓ If the LED on the display panel is not ON, ✓ whether there is water in the water trough; check whether the plug and socket are ✓ whether the water pressure for the ice normal, and whether the power supply machine is 0.13MPa to 0.
Self-Contained Ice Maker User Manual for Installation and Maintenance Code Fault Possible Cause Inspection and Troubleshooting E00 FAULT FREE * * E01 ICE SKATING BOARD OR ICE FULL SWITHC FALUT 1. Ice skating deformation. board 1. Replace the ice skating board or reinstall the ice full switch. Judgment method: visual inspection. 2. The ice full switch is faulty or falls off. 2. Replace the ice full switch. 3.
Self-Contained Ice Maker User Manual for Installation and Maintenance E02 ICE 1. Water temperature sensor Replace the water temperature sensor, MAKING failure. the condensing temperature sensor and OVER TIME the PC board in order, restart the ice 2. PC board failure. machine and test whether the ice is 3. Condensation temperature normal. sensor failure. 4. The inlet valve is not properly closed. 5. Refrigeration system failure: the compressor breaks down 6.
Self-Contained Ice Maker User Manual for Installation and Maintenance shortage). 5. Clean the pump. 9. The ice thickness is 6. Clean or replace the spray pipe. improperly set, the ambient temperature is too low, or the 7. Replace the defrosting valve. ice is too thick. 8. Clean or replace the water level 10. Drain valve failure. (water sensor. shortage in the sink, the ice in 9. Adjust the ice thickness to the the evaporator is too thin or appropriate level. doesn’t exist) 10. Replace the drain valve.
Self-Contained Ice Maker User Manual for Installation and Maintenance Limited Warranty Statement Unless otherwise stated, Glace Bay Enterprises Inc, (GBE) warrants to the original purchaser of new, qualified Snooker Ice Machine units (and all parts thereof), that such equipment will be free from defects in material and workmanship for a period of one-year parts and labor, and three years on compressor from the date of paid invoice.
Self-Contained Ice Maker User Manual for Installation and Maintenance profits or any other consequential damages. Normal wear type parts, such as light bulbs and gaskets, are not included in warranty coverage. All equipment must be plugged directly into a standard wall outlet with an appropriately sized dedicated breaker. Multiple pieces of equipment plugged in on the same circuit (this means sharing the same breaker) will void the warranty.
Self-Contained Ice Maker User Manual for Installation and Maintenance months, or sooner based on the location, using nickel safe cleaner for nickel plated evaporators and a stainless steel cleaner for stainless steel plated evaporators. DISCLAIMER We reserve the exclusive right to change or modify this warranty statement or any part herein at any time and without prior notice. Visit our website for the latest information.
Self-Contained Ice Maker User Manual for Installation and Maintenance 8