Instructions / Assembly

Self-Contained Ice Maker User Manual for Installation and Maintenance
8
Maintenance
      





Frequently clean the environment around the
ice machine to keep it clean. Do not block the
vents.
The outer enclosure should be cleaned with
a mild detergent and then wiped clean. If
necessary, use commercial stainless steel
cleaners and polishes.
     


The filter element should be inspected
regularly. It is recommended to replace filter
element every month to every 3 months.

The inside of the ice storage bin can be
washed directly with water pipes.
     

  
      


For the air-cooled ice maker, the condenser
should be cleaned every three weeks. Use a
soft brush or a vacuum cleaner with a brush
to brush it up and down along the fin direction,
to avoid damage to the fins and further
affecting the cooling effect.
The condenser filter should be cleaned every
2 weeks.
     



In order to ensure food safety, the water pipe
of the ice machine should be cleaned
regularly.

Turn off the water and power supply, drain
the residual water from the water trough, inlet
pipe and drain pipe.




       

     

     
     
     

Turn on the ice maker; push “clean” button
for 3 seconds, the ice maker will get into
clean process. Wait until the water in
process finished the led display flash
“Clean” slowly; then drain the water from
the water trough.
Put in proper amount of clean solution
manually followed by the clean and
sterilizing process instruction. Push the
“clean” button again, the ice maker will do
auto clean for about 15 minutes. Please do
spray cleaning to the evaporator at the
mean time to insure a complete clean.
When finished, the led display flash “Clean”
slowly again.
Drain the water from the water trough.
Put in proper amount of sterilizing solution
manually followed by the clean and
sterilizing process instruction. Push the
“clean” button again, the ice maker will do
auto sterilizing for about 15 minutes.
Please do spray sterilizing to the
evaporator at the mean time to insure a
complete sterilizing. When finished, the ice
maker will get into rinsing process; the
process will take about 25 minutes.
The ice maker will get back to do ice
making as soon as the clean process end.
Please throw away the next 5 batches ice
in case of cleaner remained.