Instructions / Assembly

Self-Contained Ice Maker User Manual for Installation and Maintenance
2
Code
Fault
Possible Cause
Inspection and Troubleshooting
E00
FAULT
FREE
*
*
E01
ICE
SKATING
BOARD OR
ICE FULL
SWITHC
FALUT
1. Ice skating board
deformation.
2. The ice full switch is faulty
or falls off.
3. There are ice or foreign
objects caught between the
ice-sliding board and the
evaporator (between the ice
molds) when starting up.
4. Wiring error or falling off.
5. Ice skating board magnets
fall off.
6. The ice-sliding board is not
returned.
1. Replace the ice skating board or re-
install the ice full switch. Judgment
method: visual inspection.
2. Replace the ice full switch.
Judgment method: open the ice
skating board, connect the power, the
fault code E01 displays, turn off the
power, reset the ice skating board,
connect the power again and E01
disappears. If it’s not the case, the ice
full switch is faulty.
3. Remove ice or foreign objects,
judgment method: visual inspection.
4. Reset the ice-skating board or
reverse it.
5. Re-fix the magnet and replace the ice-
skating board.
6. Correct the wiring.
Restart the machine after the above
operations