Use and Care Manual

16
30SB, 36SB, 45SB
Rev Nov2014
Snow BEAST
Operang Instrucons
Engage Transmission Drive
To engage the transmission drive squeeze the right lever to
the hand grip.
To disengage, release the right lever.
Engage Impeller/ Collector Control
To engage the impeller/collector drive, squeeze the
le lever to the handgrip.
To disengage release the le lever.
Control Interlock Feature—One Hand Free Operaon
The snow blower is equipped with a control interlock feature to allow the operator one hand free to change the
direcon of the discharge or adjust the discharge deector without stopping the forward progress of the machine.
The interlock feature allows the operator’s le hand to be free during use aer both handles are fully engaged into the
operang posion. The fee hand can then rotate the discharge chute or adjust the discharge deector angle.
In order to stop the impeller / collector assembly and the transmission system, BOTH handles must be released.
The impeller control handle can be fully engaged, and the transmission lever can be engaged and disengaged without
releasing the impeller control handle (free to engage or disengage at any me). This allows the impeller / collector
assembly to connue to discharge snow while stopping to change speeds or allow the snow blower to clear the impeller
and collector housing of snow and ice when encountering heavy snowfalls.
WARNING
The operator of the snow blower should become familiar with this feature in a clear open area away from vehicles,
homes, and away from public streets or areas with trac.
Make certain that the operator is accustomed to all controls and the interlock feature before blowing snow.
If there are any quesons regarding the control interlock feature of this snow blower please call:
GXi Customer Service at (919)-550-3221