Use and Care Manual

28
30SB, 36SB, 45SB
Rev Nov2014
Snow BEAST
Storage Instrucons
Short Term Storage
 Let engine cool before storing and do not store
near ame, high heat, and possible ignions from
sparks.
 Always clean o all ammable material as well as
grime and dirt before storage.
 Wash with mild detergent and water only.
 Aer washing the machine engage the engine at
high and let the snow blower run for 5 minutes.
 Store snow blower only on the ground.
 Follow recommendaons to avoid impeller freeze
up.
 Do not drain fuel indoors or near a ame.
 Always park machine on level ground.
 Store the machine in a clean and dry
environment.
 Always remove the safety key and ground the
spark plug to the engine.
 Always run the snow blower before storage to
clear up snow to prevent freeze up.
 Check all parts to see if they are in working
Extended Storage
 Make sure all fuel is drained from the carburetor
before storing.
 To ensure all fuel is drained from the snow blow-
er, turn the fuel valve o, then run the snow
blower unl it runs out of gas before storage.
 Add a fuel stabilizer to fresh fuel on the last
refueling day.
 Check the spark plug condion and pour two
tablespoons of engine oil in the spark plug holes
and leave the spark plugs o.
 Cover the machine when in storage.
 Everything menoned in short term
storage should also be applied to extended
storage.