Use and Care Manual

4
30SB, 36SB, 45SB
Rev Nov2014
Snow BEAST
Operaon Safety Precauons
Before aempng to use your snow blower,
make sure you are familiar with all of the
components and have read the manual.
Need Help?
Parts, Service
and Technical Assistance call:
(919)-550-3221
Monday-Friday 8AM-5PM EST
www.beastpowerequipment.com
DANGER: Do not bypass, modify, alter or
disconnect the safety system. Make sure that
the safety interlock system is fully operaonal
each me before operang the machine.
Before seng up your BEAST snow blower,
disconnect the spark plug wires from the
spark plugs and ground them against the
engine to prevent inadvertent starng. This
step should be taken as a precauon
whenever you are working on this machine.
IMPORTANT! The snow blower belts are adjusted
to ensure the augers/impeller stop turning within
ve (5) seconds of releasing the impeller control
lever. If you are making any belt adjustments
whatsoever, for your safety and the safety of
others around you, you must ensure the belts are
re-adjusted to achieve this design specicaon.
GASOLINE IS HIGHLY FLAMMABLE AND
EXPLOSIVE. FUEL LEAKS, A LOOSE FUEL TANK,
OR A LOOSE FUEL VALVE CAN LEAD TO
SEVERE INJURY OR DEATH. DO NOT OPERATE
THIS SNOW BLOWER IF ANY COMPONENT OF
THE FUEL SYSTEM IS LOOSE OR LEAKS
GASOLINE!
Clearing A Clogged Chute—Safety Precauons
1. SHUT THE ENGINE OFF!
2. Wait at least 10 seconds to be sure the augers
have stopped rotang.
3. Remove and ground the spark plug when
clearing the blockage.
4. Always use a cleanout tool and never your
hands.
Check engine oil level before each use. Maintain
oil level between run marks on the dipsck, and
change oil according to the maintenance
schedule to maximize product life.
Do NOT over-prime the engine. Pressing the
primer bulb more than 3x could result in ooding
the carburetor making the engine hard to start or
cause fuel to leak from the carburetor inlet.