Manualshelf

Use and Care Manual

ManualsBrandsSnow Beast ManualsGas Snow Blowers30 in. Commercial 306 cc 2-Stage Gas Snow Blower with Electric Start Headlights, Bonus Drift Cutters and Clean-Out Tool
11121314151617181920
10
30SB, 36SB, 45SB
Snow BEAST
Snow BEAST Snow Blower
Rev Sept 2019
Step 4: Chute Direction Control Cable Support
1. Attach the chute direction control cable hook to the
engine cover as shown.
2. Place the chute direction control cable into the
support hook, and secure with the zip-ties provided
in the hardware bag.
Step 5: Shift Rod
The shift rod is preset at the factory, it connect the
shift handle on the control panel to the transmission shift
assembly on the chassis.
1. Use the supplied hardware connect the flat end of
the shift rod to the transmission shift assembly.
2. Connect the bent end of the shift rod to the shift
Handle.
Shift rod
Step 6: Cleanout Tool and Mounting Bracket
1. Insert the mounting bracket bolts into the holes on the top of the auger housing and secure with the
M8 nuts.
2. Snap the cleanout tool into the mounting bracket. Snap the cleanout tool