Use and Care Manual

Owner’s Manual
12 | Page
SnowBear
®
Tailgate Spreader (TGS-325)
Revision 2
SPREADER LID INSTALLATION
The SnowBear
®
Tailgate Spreader comes standard with a rigid plastic lid. The lid is affixed to the spreader
hopper by two ball-loop stretch cords that are installed on the lid, and latched to the pre-installed catch
brackets.
Stretch the ball-loop cord and snap under the catch bracket and release. To remove the lid, pull on the stretch
cord and out from under the catch bracket.
SPREADER LID
CATCH
BRACKET
BALL-LOOP
STRETCH CORD
7