Use and Care Manual

1 Atir Yeda St., P.O.Box 2289, Kfar Saba 4464301, Israel, Tel: [phone]
Specific Migration Limit (SML)
SM has been evaluated in compliance with Regulation 10/2011 by calculation or, if necessary, in experimental way.
All calculations have been carried out under the condition that 1 kg of food is in contact with 6 sq.dm of packaging
product in simulants B, C for 10 days at 60oC. We report the analysis or calculated results as mg/kg.
Specific migration of residual monomers from PET
Simulant
Material
CAS No
SML, mg/kg
B
C
Terephthalic acid
100-21-0
7.5
<7.5
<7.5
Isophthalic acid
121-91-5
5
<5
<5
Diethylene glycol
111-46-6
30
<30
<30
Monoethylene glycol
107-21-1
30
<30
<30
Antimony trioxide is listed as additive
1309-64-1
0.04
<0.04
<0.04
Acetaldehyde
75-07-0
6
<6
<6
Specific migration of residual monomers from ABS
Butadiene
106-99-0
1
<1
<1
Acrylonitrile
107-13-1
DL=0.02
ND
ND
p-cresol-dicyclopentadiene copo
123-28-4
5
<5
Styrene
100-42-5
DL=0.02
ND
ND
Specific migration of residual monomers from Silicone rubber
Dimethylsiloxane
106-99-0
1
<1
<1
Acrylonitrile
63148-62-9
DL=0.02
ND
ND
Peroxide Benzoyl
65-85-0
DL=0.02
ND
ND
Calculation of "worst case" migration (100%) for the above substances shows that none can exceed respective SML.
Calculation is based on maximum amount of substances found in raw materials according to our supplier's
Declaration of Compliance.
Also, calculation of "worst case" migration (100%) shows that OML of 10mg/dm2 or 60 mg/kg food cannot be exceed.
It is valid for above simulants.
The final item producer is responsible for the evaluation of overall/specific migration at the real
time/temperature conditions or used under conditions deviating from test conditions.
Conclusion
We also declare that should we or any occasion change the composition of our products in a way that would
interfere with the declaration, we will inform your company
This declaration is valid for a period of 12 months. It should be renewed in the case of a change of the raw
materials, composition of the product, the legal regulations or new toxicological realizations.
This product information is machine-printed and will not be signed.
Soda Stream
Product Safety
Additional information
• Phthalates: The phthalates are not intentionally added to product formulation. Further, none of the constituent raw materials
is specified by its supplier to contain phthalates as an impurity. Maximum residuals are not more than 15 ppm.