Assembly Instruction

4of5
STEP 3 - Attach Fixture Body to Post
A. Coat the top 1” of the Post with Clear Silicone Caulk
(not supplied) and position the Post Fitter onto the Post.
Be sure to seat it completely, aligning the holes in the
Fitter with the 1/16” Pilot Holes drilled into the Post.
B. Secure the Fixture to Post with (3) Mounting Screws.
Figure 4
Mounting
Hole
Post Fitter
Mounting Screw
Post
STEP 4 - Attach Center Stem to Fixture Body
(E)a. Thread the beaded end of the Center Stem into the
mounting hole on the top center of the Junction Box.
Hand tighten until snug.
Figure 5
Figure 6
STEP 5 Attach Candle Cover to Socket
Assembly
-
A. Place the Candle Cover (G) over the Socket properly.
Center Stem
Socket
Candle
Cover
Thank you for purchasing our product.
Need assistance with parts or assembly? Call our customer service or visit our website
Assembly Instruction