SDS

Shenzhen Anbotek Compliance Laboratory Limited
Page 2 of 8 Report No.R011501580B
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of
liability, indemnification and jurisdictional issues defined therein. The results shown in this report refer only to the sample(s) tested unless
otherwise stated. This Test Report cannot be reproduced, except in full, without prior written permission of the company.
Shenzhen Anbotek Compliance Laboratory Limited
Address: 1/F., Building 1, SEC Industrial Park, No. 0409 Qianhai Road, Nanshan District, Shenzhen, Guangdong, China
Tel: [phone] Fax: [phone] Email: [e-mail] Http: //www.anbotek.com.cn
MSDS
MATERIAL SAFETY DATA SHEET
Section 1. Chemical Product and Company Identification
Products Name: Li-ion Battery
Model Number: PLG7543126(The battery is contained in Jump starter, the model
is E-Power-36.)
Rating: Nominal Voltage: 11.1V
Rated Capacity: 3350mAh, 37.19Wh
Weight:302.80g
Manufacture Name: Shenzhen Vision Technology Co., Ltd.
Address: Center Power Industrial Park, Tongfuyu Industrial Zone, Dapeng New District,
Dapeng Town, Shenzhen..
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Section 2. Composition/Information on Ingredients
Substance/preparation: preparation
Chemical Name Percent of Content CAS No. OSHA (PEL) ACGIH
Lithium Cobalt
Dioxide (LiCoO2)
25%~35% 12190-79-3 N/A 0.02mg/m3
as Co
Graphite (C) 15%~20% 7782-42-5 7.5mg/m3 (as
dust)
2mg/m3
Poly Vnylidene
Fluoride (PVDF)
1%~5% 24937-79-9 N/A N/A
Acetylene Black 0.5%~3% 1333-86-4 N/A N/A
Aluminum(AL) 21%~23% 7429-90-5 N/A N/A
Copper(Cu) 10%~11% 7440-50-8 N/A N/A