olberg SMConfigurationA(Pg.3-10,11) Instruction Manual

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: [phone] Email: [e-mail] Web: www.solbergmfg.com
Page 8
C. Polyurethane Prefilter: The prefilter may be washed as a sponge or
replaced to give the element a longer service life.
D. Epoxy Coated Wire Mesh and Stainless Steel Wire Mesh Elements:
Cleaning instructions similar to polyester, except mild solvents may be
used.
E. Activated Carbon Element: Not cleanable
F. Polypropylene Element: Cleaning instructions similar to polyester
G. Nomex Cloth Element: Cleaning instructions similar to polyester
If you are not confident that the integrity of the element was maintained during
cleaning, it is recommended that a new element be installed. Also, spare parts
such as gaskets, wing nuts and washers can be supplied upon request.
Section C
PROCEDURES
1. Installation.
Figure C.1: Housing Terms