SDS

Safety Data Sheet
according to Regulation (EC) No 1907/2006 (REACH)
Trade name: Solder-It
Product No: Print date:
Version: 2.4 / EN Page 5 of 10 Revision date: 5.12.2014
______________________________________________________________________________________________________________
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place. Highly hygroscopic. Keep in a
dry place.
Hints on storage assembly:
Storage class: (TRGS 510): Non-combustible, corrosive hazardous material.
Materials to avoid:
7.3 Specific end uses:
Recommendations: Apart from uses mentioned in section 1.2 no other specific uses are
stipulated.
_______________________________________________________________________________________________________________
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
8.1.1 Occupational exposure limits:
_______
_______
________________________________________________________________________________________________
8.2 Exposure controls
8.2.1 Appropriate engineering controls: Handle in accordance with good industrial hygiene and
safety practices. Wash hands before breaks and at the end of the workday.
8.2.2 Personal protective equipment:
8.2.2.1 Eye / Face protection: Face shield with safety glasses. Use equipment for eye protecton tested
and approved under appropriate standards.
Limit value
type (country
of origin)
Substance
name
EC
-
No.
CAS
-
No.
Occupational
exposure limit
value
M
onitoring
and observation
processes
Peak
limitation
Source
Long term
Short term
TWA
Zinc
chloride
7646
-
85
-
7
1.000
mg/m3
1.000
mg/m3
OSHA
Table Z-1
Ammonium
chloride
12125
-
02
-
9
10.000
mg/m3
10.000
mg/m3
ACGIH
(TLV)
Tin
7440
-
31
-
5
2
mg/m3
OSHA
(PEL)
Silver
7440
-
50
-
8
0.01mg/
m3
OSHA
(PEL)