Specification Sheet

14
GC_TD_0215 February 2015
MODEL OVERVIEW
The TD-MIXVENT series of in-line duct fans have been specially designed to maximize the airow performance
with minimal noise levels within the smallest and most compact of housing sizes. This makes the TD-MIXVENT
series the ultimate solution for small to medium sized ventilation installations which require a high airow to
pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cabinets and many
other limited space environments.
All the models in the TD-MIXVENT range have been designed with the professional contractor/engineer in
mind. All models include a “removable body” feature that enables the motor-impeller assembly to be completely
removed or replaced without the need to interfere with the attached ducting.
All models within the TD-MIXVENT range incorporate a powerful mixed ow impeller and internal air vanes
located at the discharge end of the fan housing. This impeller and guide vane combination provides a smooth
laminar air ow which in turn minimizes turbulence and noise, and generates an excellent air ow to pressure
performance ratio.
All of the TD-fans include the combination of a powerful motor, factory installed, to a mixed ow impeller. This
motor and impeller combination enables the TD-fans to deliver high airow performances with minimum noise
generation against high static pressures typically found in ducted ventilation systems. The unique design of
the support brackets allows the motor and impeller assembly to be tted or removed without dismantling the
adjacent ducting, therefore facilitating any installation or maintenance. The internal aerodynamic design of the
TD-MIXVENT fan enables the unit to generate large air volumes and pressures with the minimum of in-duct
or radiated noise. As an additional standard advantage, TD-MIXVENT fans are tted with a direct connection
two-speed motor. The TD-fans offer the ideal in-line duct fan solution for a wide range of HVAC ventilation
applications.
TD-MIXVENT Fan Kits
The TD ventilation kits enable the simple and fast installation of a complete ventilation system. The kits include
the powerful TD in-line fan providing efcient extraction for bathrooms, toilets, washrooms and any other
applications that require the removal of bad odors, stuffy and humid air. In addition
to the fan, the kits include an interior premium intake grille (PG) and an exterior
louvered grille (PERW) to provide the complete hardware required for a given
ventilation system.
5 year fan housing and motor warranty
Model TD-MIXVENT is
available in our Quickship
program. All sizes are available
for next day shipping from stock.
MODEL TD-MIXVENT
INLINE MIXED FLOW DUCT FAN
MODEL FEATURES
• Exhaust air up to 2,630 CFM with static pressure capabilities to 1” w.g.
• Mixed ow impeller for excellent air ow to pressure performance ratio
• Direct connection, two-speed motor
• Ideal for applications where space is limited
• AMCA Seal for Air Performance
• cULus Listed
All specications are subject to change without notice unless approved in submittal by Soler & Palau.