Specification Sheet

15
PG
Premium Intake
Grille
BOC/BOR
Interior Air
Valve
MCA
Backdraft
Shutter
MBR
Connector
MAR
Rectangular Duct
Adapter
MRJ
Grille
CVC
Continuous
Ventilation Controls
ACCESSORIES
Please refer to the S&P Group A (Residential/Light Commercial) catalog for a complete line of accessories.
MODEL TD-MIXVENT
INLINE MIXED FLOW DUCT FAN
CONSTRUCTION/SPECIFICATION CHECKLIST
Construction
The TD-MIXVENT models 100, 100x, 125, 150 and 200 are manufactured in tough reinforced
plastic, models 250 and 315, 355 and 400 have a metal casing and are nished in a tough epoxy-
polyester paint coating.
The TD fan duct connection anges are manufactured from reinforced plastic, except for models
200, 200, 250, 315, 355 and 400 which are constructed from epoxy-polyester coated metal.
TD 250 and 315 are UL listed for outdoor use.
TD 355 and 400 are UL 507 and UL 705 certied.
Impellers
The impeller blades for models 100, 100x, 125 and 150 are molded in tough ABS plastic. Models
200, 250, 315, 355 and 400 are metal.
Motors
Models 100, 100x and 125:
Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All
motors include direct two speed connection and are also suitable for voltage speed control.
• Class ll electrical insulation (model 100) &
Class l (models 100x and 125)
• IP 44 Protection
• Class B Motor Insulation
• Safety auto reset Thermal Overload Protection (fuse type)
• Self-lubricating sleeve bearings.
• Suitable for working airstreams up to 104° F (40°C).
Models 150, 200, 250, 315, 355 and 400:
Single-phase induction asynchronous motor, with permanent capacitor and external rotor in die cast
aluminum. Models 150, 200, and 315 include direct two speed connection and are also suitable for
voltage speed control. Models 355 and 400 are single speed.
• Suitable for working airstreams up to 140° F (60°C).
• Class I electrical insulation
• IP 44 Protection
• Thermal Overload Protection
• Class B Motor Insulation
• Sealed For Life, ball bearings