Specification Sheet
Table Of Contents
192
OPTIONS/ACCESSORIES
Solid State Speed Control: S&P’s solid state control is matched to allow smooth RPM variation and
adjustment of airow for system balancing. CFM is reduced in direct proportion to motor speed reduction.
Speed controllers available for 115/1 or 230/1 operation. Exhauster performance can be controlled from
the ventilated area.
Roof Curb: Prefabricated heavy-gauge galvanized steel, welded construction, 12" high (other
heights are also available) with 1-1/2" wood nailer. Assures perfect t of exhauster to roof opening.
Options include burglar bars, single or double pitch construction and hinged curbs for easy duct
access.
Motor Operated Damper: Motor operated aluminum damper for positive closure against backdraft
(Not for UL762 use).
Automatic Damper: Automatic aluminum damper for ease in installation and effective backdraft
protection (Not for UL762 use).
Grease Grabber: Trap designed for fast and inexpensive replacement. Grease collects in a
container for safe and sanitary disposal. Keeps roof clean with proper use.
Wall Mount Kit: Kit allows 6-15" fans to be wall mounted. Assembled as standard on all TXDW units, not available
for not wall mount units. See current submittal for details.
Curb Hinge Arrangement: The curb hinge arrangement provides easy access to the exhaust fan, backdraft
damper, and duct for servicing and cleaning.
Special Coatings: Powered roof exhausters often require special coatings for protective and decorative purposes.
Available coatings include: Synthetic Resin, Epoxy, and Heresite (air-dried phenolic). Contact your representative
or the factory for more information on available coatings and colors.
MODEL TXD
DIRECT DRIVE CENTRIFUGAL UPBLAST ROOF EXHAUSTER