Specification Sheet

20
Model
Duct
Dia.
Ins.
Nom.
RPM
Volts
Max.
Watts
Speed
CFM v Static Pressure (SP) Ins. WG
Max.
SP
Max
operating
temp. (ºF)
Wgt.
(lbs)
0” 0.125” 0.25” 0.375” 0.5” 0.75” 1.0”
TD-100XS
4” 2000 120 21 LS 108 82 48 - - - - 0.4 104
11.9
4” 2500 120 35 HS 143 121 91 59 23 - - 0.6 104
5” 2000 120 21 LS 147 110 63 - - - - 0.4 104
5” 2500 120 36 HS 203 175 138 84 33 - - 0.6 104
TD-150S
6” 2200 120 55 LS 239 209 181 154 120 62 - 0.95 140
13.2
6” 2700 120 65 HS 333 315 286 271 257 178 77 1.2 140
TD-200S
8” 2000 120 115 LS 409 367 333 306 271 183 46 1.2 140
19.2
8” 2200 120
122 HS 530 503 472 443 415 349 204 1.2 140
Model A B Ø C D Ø E F G H
TD-100XS
22
5/8
3
13/16
9
15/16
8
1/16
3
15/16
9
13/16
3
1/4
4
3/4
TD-150S
19
1/16
5
13/16
10
13/16
8
11/16
4
9/16
9
13/16
3
3/4
5
1/4
TD-200S
22
3/8
7
13/16
12
7/8
10
3/8
5
11/16
13
11/16
5
1/16
6
7/16
The TD-SILENT Models 100XS
and 150S are California Title 24
compliant and meet ASHRAE 62.2
when installed with a CVC and other
TD models are compliant when
installed with a 3 way switch and
remotely mounted speed control.
MODEL TD-SILENT
EXTREMELY QUIET INLINE MIXED FLOW DUCT FAN
Performance characteristics
All models include a direct two speed motor connection.
Dimensions (inches/mm)
LS= Low Speed
HS = High Speed
Sound characteristics
Fan sound levels are measured in sones. At this time there are no sone level test standards available through HVI due to the fact that remote mounted fan
noise levels are in proportion to the following: type of duct, length of duct, fan distance from the intake source and other miscellaneous factors. However,
it is generally accepted that remote mounted venting is usually quieter than standard (in room) venting.
PERFORMANCE/DIMENSIONS