Specification Sheet

204
CONSTRUCTION/SPECIFICATION CHECKLIST
Blower
• Statically and dynamically balanced forward curved wheel.
• 12-gauge galvanized steel blower plate/discharge opening.
• 18-gauge galvanized steel housing.
• Prepunched mounting holes.
• Conduit opening for wiring from below unit.
Motors
• 1 year warranty.
• Brands are nationally recognized and locally serviced.
• Single speed open drip-proof are standard.
• Explosion-proof, totally enclosed and two-speed motors are available.
• All motors are rated for continuous duty.
• 182T and larger motors shipped unmounted for eld installation.
• Disconnect switch standard with single speed drip-proof and totally enclosed motors.
Hood
• Heavy-gauge galvanized steel hood.
• Quick-release latches for removal from housing.
• 1 inch washable aluminum mesh lters.
Drives
• Adjustable motor pulleys are standard.
• Sized for minimum 150% of drive horsepower.
• Machined cast iron adjustable motor pulleys.
• Pivoting motor plate for belt tensioning.
• Nonstatic oil resistant V-belts.
Certications
• AMCA Air and Sound Licensed.
• cULus Standard 705 Listed Power Roof Ventilator label assures electrical reliability.
• cULus label must be specied when needed.
MODEL KSF
BELT DRIVE CENTRIFUGAL FILTERED SUPPLY FAN