Specification Sheet

205
OPTIONS/ACCESSORIES
Insulated Hood: High performance and ecologically friendly berglass free insulation only.
Intake Extension: Extensions are available for all size KSF fans to provide NFPA required clearance from
the exhaust fan on factory sup plied common curbs. Extensions are made from heavy-gauge galvanized
steel and require equipment supports on the intake end.
Roof Curb: Prefabricated heavy-gauge galvanized steel, welded con struction, 12" high
with 1-1/2" wood nailer. Options include single and double pitch construction and additional
curb heights.
Motor Operated Damper: Motor operated aluminum damper for positive closure against
backdraft (counter balanced).
Automatic Damper: Automatic aluminum damper for ease in installation and effective
backdraft protection (counter balanced).
Duct Adapter: For ease in connecting discharge duct to fan outlet.
Common Curb: Designed to allow both the supply fan and exhaust fan to be mounted on the same
curb. This curb requires only one roof opening and speeds installation time.
Special Coatings: For protective and decorative purposes. Available coatings include: Epoxy, Synthetic
Resin, and Heresite (air-dried phenolic). Contact your Soler & Palau representative or the factory for
more information on available coatings and colors.
MODEL KSF
BELT DRIVE CENTRIFUGAL FILTERED SUPPLY FAN
MODEL KSF
BELT DRIVE CENTRIFUGAL FILTERED SUPPLY FAN