Specification Sheet

267
Model CFD is available
in our Quickship program.
All sizes are available for next
day shipping from stock.
MODEL CFD
Forward Curved Belt Driven Inline Duct Blower
2 year fan housing warranty, 1 year motor warranty
MODEL OVERVIEW
S&P’s Forward Curved Belt Driven Inline Duct Blowers are designed for supply, exhaust or ducted return ap-
plications. The CFD is an economical fan model designed to run quietly and efciently in cooling, heating, and
ventilating applications.
The CFD was designed with several features to make life easier for the user. These features include: remov-
able access panels with handles, adjustable motor pulleys for easy eld adjusting, tight seals, and hanging rod
connections.
A wide range of accessories and motors are available to meet special applications. These include: totally en-
closed and two speed motors. Some of the accessory options available are: lter housings, hanging and oor
mount isolators and insulated housings.
MODEL FEATURES
• Rated up to 5,800 CFM in static pressure applications up to 2-1/2” w.g.
• 5 sizes ranging from 7 to 15
• Single DWDI forward curved blower assembly with the motor located in
the air stream
• Belt drives permit easy performance adjustments when needed
• Can be used in both horizontal & vertical air ow positions
• Removable access panels provide easy access for service
• AMCA Air & Sound Certied
• cULus Listed
All specications are subject to change without notice unless approved in submittal by S&P USA.
STANDARD CONSTRUCTION FEATURES
Galvanized Steel Housing
Encloses blower, motor and
drives.
Forward Curved DWDI
Blower
For efcient airow and quiet
performance.
Factory Run & Tested
For quality assurance and
dependable operation.
Inlet and Outlet Duct
Connectors
Removable Access Panel
For easy access for service
Horizontal Hanging Brackets
Bearings
Heavy-duty, ball bearing are
designed for minimum 200,000
hours of operation, L50.
AMCA Seal
Assures certied rating of air
and sound performance.
cULus 705 Listed
For electrical reliability.