Specification Sheet
Table Of Contents
316
Model LC, Model L2 and Model L3
Size 60
Limits
Panel OD
Square
Min. Wall
Opening
Damper
OD
Approx.
Wt
Model RPM
Motor
Frame
LC 380 182T 66 67 1/2 64 1/2 285
L2 460 184T 66 67 1/2 64 1/2 490
L3 700 256T 66 67 1/2 64 1/2 530
Size
Motor
HP
Max
BHP
Fan
RPM
Sones
(0.00” SP)
Static Pressure (Inches W.G)
.000 .125 .150 .200 .250 .375 .500 .625 .750 1.000
Level 1 Construction
Model LC 60
1
1.00 250 10.3 26878 20089 16672 - - - - - - -
1.08 255 10.7 27416 20835 18009 - - - - - - -
1.21 265 11.5 28491 22275 20109 - - - - - - -
1 1/2
1.50 285 13.0 30641 25041 23280 20999 - - - - - -
1.69 295 13.9 31717 26369 24721 22844 - - - - - -
1.75 300 14.3 32254 27023 25433 23649 - - - - - -
2
2.00 310 15.1 33329 28317 26824 25176 18811 - - - - -
2.23 325 16.3 34942 30222 28846 27344 23361 - - - - -
2.44 335 17.1 36017 31464
30159 28751 25399 - - - - -
3
3.03 360 19.1 38705 34490 33367 32125 29373 25314 - - - -
3.29 370 20 39780 35672 34618 33430 30822 27531 - - - -
3.56 380 21 40855 36826 35849 34723 32244 29351 - - - -
Level 2 Construction
Model L2 60
1
1.00 250 9.9 25631 17744 15842 - - - - - - -
1.08 260 10.6 26656 19351 17368 - - - - - - -
1.21 270 11.3 27681 20986 18860 15136 - - - - - -
1 1/2
1.50 290 12.7 29732 23756 22062 18500 - - - - - -
1.67 300 13.4 30757 25033 23639 20021 16501 - - - - -
1.83 310 14.2 31782 26280 25017 21513 18376 - - - - -
2
2.00 320 15.0
32808 27513 26324 23013 20017 - - - - -
2.11 325 15.4 33320 28131 26963 23823 20803 - - - - -
2.22 330 15.8 33833 28744 27594 24667 21569 - - - - -
3
3.00 365 19.0 37421 32929 31915 29813 26912 19530 - - - -
3.38 380 20 38959 34674 33724 31731 29390 22561 - - - -
3.64 390 21 39984 35821 34914 32979 30912 24209 - - - -
5
5.00 435 25 44598 40862 40121 38488 36744 31031 25399 - - -
5.60 450 26 46136 42519 41809 40275 38594 33461 27901 - - -
5.98 460 27 47161 43618 42926 41454 39830 35125 29479 - - -
Level 3 Construction
Model L3 60
7 1/2
7.03 485 29 49724 46353 45700 44359 42869 38864 33248 28162 - -
7.50 495
30 50749 47441 46803 45502 44065 40196 34740 29870 - -
7.91 505 31 51774 48527 47902 46633 45252 41497 36241 31497 - -
9.09 530 34 54338 51231 50636 49437 48180 44658 40368 35343 30623 -
10
10.00 545 35 55875 52847 52268 51107 49912 46512 42747 37583 33176 -
10.78 560 37 57413 54459 53895 52767 51617 48365 44872 39824 35577 -
11.98 580 39 59464 56603 56058 54969 53868 50812 47513 43039 38629 -
15
15.00 625 44 64077 61406 60896 59886 58874 56189 53177 50021 45397 37596
16.48 645 47 66128 63532 63037 62056 61078 58529 55646 52673 48763 40825
17.98 665 49 68178 65654 65173 64219 63271 60843 58098 55240 51973 43894
R
®
AIR
MOVEMENT
AND CONTROL
ASSOCIATION
INTERNATIONAL, INC.
AIR
PERFORMANCE
SOUND
and
S&P USA Ventilation Systems, LLC., Div.
of Soler & Palau Ventilation Group, certies
that the models shown herein are licensed to
bear the AMCA Seal. The ratings shown are
based on test and procedures performed in
accordance with AMCA Publication 211 and
AMCA Publication 311 and comply with the
requirement of the AMCA Certied Ratings
Program.
Performance ratings do not include the effects of appurtenances (accessories).
Power ratings (BHP) do not include transmission losses.
Performance certied is for installation type A-free inlet, free outlet.
The sound ratings shown are loudness values in fan sones @ 5' (1.5m) in a hemispherical free eld calculated per AMCA Standard 301. Values
shown are for installation Type A-Free inlet fan sone levels.
Due to air stream cooling, the motor loading into the service factor shown does not overheat the motor and is within NEMA recommended limits.
BHP at most static pressure points is less than the maximum power shown - in many cases substantially less. Use Optisizer to see the exact
BHP for your selection.
Standard 705
(Optional)
Standard 705
(Optional)
LC:
L2 & L3:
MODELS LCE/LCS, L2E/L2S, L3E/L3S
BELT DRIVE SIDEWALL PROPELLER FANS