Specification Sheet

330
Motor Side Guard
Integral OSHA approved
guard is standard.
Motor
Nationally
recognized brands,
locally serviced.
Entire Unit
Suitable for all-
angle installation.
Mounting Holes
Prepunched in
panel for ease in
installation.
Propeller
Fabricated
Aluminum blades.
Panel
Galvanized steel
with spun venturi.
MODEL GED & GSD CONSTRUCTION FEATURES
cULus Listed - Standard 705
(optional)
Construction/Specication Checklist
Panel Assembly
• Galvanized steel, 16 or 18 gauge, G-90.
• One piece spun venturi for maximum efciency.
• Prepunched mounting holes for easy
installation.
• Formed anges for added rigidity.
• Integral OSHA approved motorside guard.
Propeller
• Fabricated aluminum blades, precision pitch.
• Mounted directly on motor shaft for maximum
efciency.
• Separate exhaust and supply designs.
• Statically and dynamically balanced.
Motors
• Nationally recognized brands, locally serviced.
• Sealed ball bearings on larger fractionals.
• Sleeve bearings on smaller fractionals.
• Open drip-proof motor enclosures.
Entire Fan Unit
• Suitable for all-angle installation.
• Completely assembled and factory tested prior
to shipment.
Certications
• AMCA Air and Sound Licensed.
• cULus 705 Listed Power Roof Ventilator label
assures electrical reliability.
• UL label must be specied when needed.
All specications are subject to change without notice unless approved in submittal by S&P USA.
Factory Run & Tested
For quality assurance and
dependable operation.
Industry best 5 year fan housing warranty, 1 year motor warranty
MODELS GED/GSD, DFE/DFS, DDE/DDS
DIRECT DRIVE SIDEWALL PROPELLER FANS
AMCA Seal
Assures rating
of Sound and Air
performance.