Specification Sheet

395
Floor or Hanging Isolator Options
OPTIONS/ACCESSORIES
Hanging & Floor Brackets: For base or ceiling mounting. Neoprene and spring isolators are
available.
Mounting Rails: Designed for vertical and horizontal mounting. Rail kits include mounting brackets.
Vertical mounting available by special quote on sizes 34-48”.
Inlet/Outlet Guard: Prevents objects from entering the fan inlet or outlet. Includes companion ange.
Inspection Door: For inspection and blade service/cleaning. Bolted. Not available on sizes 12 and
16.
Companion Flanges: Inlet and/or outlet anges are available for duct connection.
Belt Guard: Encloses belt and motor sheave on exterior of fan.
Motor Cover: Three sided guard that covers motor, sheave and belt. Motor may extend past cover
on sizes 12, 16, and 18.
Adjustable Sheave: Can be specied for 7-1/2HP and larger units (standard through 5HP).
Shaft Seal: Protects bearings and belts when fan is handling dirty or contaminated air.
Disconnect Switch: Nonfused safety disconnect available for all motor sizes and enclosures. Specify
prewired if desired. (Wiring not available on explosion proof and two speed motors).
Special Coatings (Epoxy Coating is Standard): For protective and decorative purposes. Available
coatings include: Synthetic Resin and Heresite (air-dried phenolic). Contact your representative or the
factory for more information on available coatings and colors.
MODEL TDB
TUBEAXIAL INLINE BELT DRIVEN DUCT FAN
Floor Mount
MOUNTING CONFIGURATIONS
Hanging Mount Rail Floor Mount
Vertical Rail Floor
Mount
Vertical Rail
Hanging Mount
Rail Hanging
Mount
Note: The 12 & 16 are designed to mount to a supported duct work
and do not have all mounting congurations.
Vertical mounting
available on
special quote on
sizes 34-48”.