Specification Sheet

397
MODEL TDB
BELT DRIVE TUBEAXIAL DUCT FAN
Size 16
MODEL TDB
BELT DRIVE TUBEAXIAL DUCT FAN
Standard 705
HP RPM
Static Pressure (Inches W.G.)
0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.25
CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
1/4
1100 1888 0.13 1621 0.15 1270 0.16 - - - - - - - - - - - - - -
1175 2017 0.16 1771 0.18 1461 0.19 - - - - - - - - - - - - - -
1225 2103 0.18 1869 0.20 1581 0.22 1205 0.23 - - - - - - - - - - - -
1275 2189 0.21 1965 0.22 1696 0.24 1355 0.25 - - - - - - - - - - - -
1/3
1300 2232 0.22 2013 0.24 1753 0.25 1427 0.27 - - - - - -
- - - - - -
1350 2318 0.25 2109 0.26 1863 0.28 1563 0.30 1182 0.30 - - - - - - - - - -
1375 2360 0.26 2156 0.28 1917 0.30 1628 0.31 1265 0.32 - - - - - - - - - -
1425 2446 0.29 2250 0.31 2023 0.33 1755 0.34 1424 0.36 - - - - - - - - - -
1/2
1475 2532 0.32 2343 0.34 2128 0.36 1876 0.38 1573 0.39 1202 0.40 - - - - - - - -
1525 2618 0.35 2436 0.37 2230 0.39 1994 0.41 1713 0.43 1374 0.44 - - - - - - - -
1575 2704 0.39 2529 0.41 2332 0.43 2108 0.45 1847 0.47 1535 0.48 1170 0.48 - - - - - -
1625
2790 0.43 2621 0.45 2432 0.47 2219 0.49 1975 0.51 1688 0.53 1349 0.53 - - - - - -
3/4
1675 2875 0.47 2712 0.49 2530 0.51 2328 0.53 2099 0.56 1832 0.57 1520 0.58 1168 0.58 - - - -
1750 3004 0.53 2849 0.56 2677 0.58 2488 0.60 2277 0.63 2037 0.65 1758 0.66 1439 0.66 - - - -
1825 3133 0.61 2985 0.63 2821 0.65 2644 0.68 2448 0.70 2229 0.72 1979 0.74 1693 0.75 1374 0.75 - -
1875 3219 0.66 3075 0.68 2917 0.70 2746 0.73 2560 0.76 2352 0.78 2118 0.80 1852 0.81 1553 0.82 - -
1
1925 3305 0.71 3165 0.73 3012 0.76 2848 0.79 2669 0.81 2472 0.84 2252 0.86 2004 0.87 1724 0.88 - -
1975 3390 0.77 3255 0.79 3106 0.82
2948 0.85 2776 0.87 2589 0.90 2381 0.92 2149 0.94 1888 0.95 1296 0.96
2025 3476 0.83 3344 0.85 3200 0.88 3047 0.91 2882 0.93 2703 0.96 2506 0.99 2288 1.01 2043 1.02 1480 1.03
2075 3562 0.89 3433 0.92 3294 0.94 3145 0.97 2986 1.00 2815 1.03 2627 1.05 2421 1.08 2192 1.09 1661 1.11
R
®
AIR
MOVEMENT
AND CONTROL
ASSOCIATION
INTERNATIONAL, INC.
AIR
PERFORMANCE
SOUND
and
S&P USA Ventilation Systems, LLC., Div. of
Soler & Palau Ventilation Group certies that
the Models TDB shown herein are licensed to
bear the AMCA Seal. The ratings shown are
based on test and procedures performed in
accordance with AMCA Publication 211 and
AMCA Publication 311 and comply with the
requirement of the AMCA Certied Ratings
Program.
Performance certied is for installation type A - free inlet, free outlet.
Performance ratings do not include the effects of appurtenances (accessories).
Power rating (BHP) does not include transmission losses.
Max. Motor Frame: 145T
Shaft Size: 5/8"
Housing Gauge: 16
Approximate Weight: 110 lbs.
Flange Holes: 8
Diameter Flange Holes: 7/16”
Finish: Epoxy Coated
Galvanized
A B C E B.C.D.
16-3/8 18-1/2 17* 23 17-3/8
A: ID B: OD C: Length E: Max. Height
*Motor may extend past unit
E
B.C.D.
B
A
.436
Dia.
Front View
C
Side View
Air Flow