Specification Sheet
Table Of Contents
402
Size 34
HP RPM
Static Pressure (Inches W.G.)
0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 1.5
CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
3/4
600 9375 0.43 7491 0.48 - - - - - - - - - - - - - - - - - -
625 9765 0.49 7994 0.54 - - - - - - - - - - - - - - - - - -
650 10156 0.55 8483 0.60 5890 0.60 - - - - - - - - - - - - - - - -
675 10547 0.61 8960 0.67 6580 0.67 - - - - - - - - - - - - - - - -
1
700 10937 0.69 9428
0.75 7235 0.75 - - - - - - - - - - - - - - - -
725 11328 0.76 9887 0.83 7858 0.84 5118 0.84 - - - - - - - - - - - - - -
750 11718 0.84 10339 0.91 8453 0.93 5870 0.92 - - - - - - - - - - - - - -
775 12109 0.93 10786 1.01 9024 1.03 6609 1.02 - - - - - - - - - - - - - -
1 1/2
800 12500 1.02 11228 1.10 9573 1.13 7324 1.12 - - - - - - - - - - - - - -
825 12890 1.12 11665 1.21 10106 1.24 8013 1.23 5542 1.25 - - - - - - - - - - -
-
850 13281 1.23 12098 1.32 10624 1.35 8673 1.35 6297 1.35 - - - - - - - - - - - -
875 13672 1.34 12528 1.43 11129 1.47 9306 1.47 7046 1.47 - - - - - - - - - - - -
2
900 14062 1.46 12956 1.55 11623 1.60 9915 1.61 7779 1.59 5523 1.64 - - - - - - - - - -
925 14453 1.58 13380 1.68 12108 1.74 10502 1.75 8492 1.73 6276 1.76 - - - - - - - - - -
950 14843 1.71 13802 1.82 12585 1.88 11070 1.89 9181 1.88 7031 1.89 4989 1.99 - - - - - - - -
975 15234 1.85 14223 1.96 13055 2.02 11621 2.05 9846 2.03 7780 2.03 5725 2.11 - -
- - - - - -
3
1025 16015 2.15 15057 2.27 13977 2.34 12681 2.38 11106 2.37 9235 2.35 7229 2.38 5357 2.50 - - - - - -
1050 16406 2.31 15472 2.43 14430 2.51 13194 2.55 11705 2.55 9934 2.53 7982 2.54 6091 2.64 - - - - - -
1100 17187 2.66 16298 2.79 15324 2.88 14191 2.93 12850 2.94 11265 2.92 9462 2.91 7593 2.95 - - - - - -
1125 17578 2.85 16709 2.98 15766 3.07 14677 3.13 13401 3.14 11899 3.13 10178 3.11 8347 3.13 6586 3.24 - - - -
5
1175 18359 3.24 17528 3.38 16641 3.48 15630 3.55 14465 3.58 13111 3.58 11554 3.55 9837 3.55 8088 3.60 - - - -
1225 19140 3.67 18343 3.82 17504 3.93 16561 4.01 15489 4.05
14259 4.06 12850 4.04 11271 4.02 9594 4.03 - - - -
1275 19921 4.14 19155 4.30 18360 4.42 17475 4.50 16480 4.55 15354 4.57 14075 4.57 12635 4.54 11065 4.53 - - - -
1325 20703 4.65 19964 4.81 19208 4.94 18373 5.03 17446 5.10 16407 5.13 15238 5.13 13926 5.11 12478 5.09 9384 5.14 - -
7 1/2
1375 21484 5.20 20771 5.37 20049 5.50 19260 5.61 18390 5.68 17426 5.72 16351 5.74 15151 5.73 13823 5.70 10888 5.70 - -
1425 22265 5.78 21576 5.96 20885 6.10 20136 6.22 19316 6.30 18416 6.36 17421 6.39 16319 6.38 15101 6.36 12357 6.32 - -
1475 23046 6.42 22378 6.60 21717 6.75 21003 6.87 20228 6.97 19383 7.04 18457 7.07 17438 7.08 16318 7.07 13774 7.02 10990 7.06
1525 23827 7.09 23179 7.28 22544
7.44 21862 7.57 21127 7.68 20330 7.76 19464 7.81 18517 7.83 17482 7.82 15131 7.77 12484 7.76
Standard 705
R
®
AIR
MOVEMENT
AND CONTROL
ASSOCIATION
INTERNATIONAL, INC.
AIR
PERFORMANCE
SOUND
and
S&P USA Ventilation Systems, LLC., Div. of
Soler & Palau Ventilation Group certies that
the Models TDB shown herein are licensed to
bear the AMCA Seal. The ratings shown are
based on test and procedures performed in
accordance with AMCA Publication 211 and
AMCA Publication 311 and comply with the
requirement of the AMCA Certied Ratings
Program.
Performance certied is for installation type A - free inlet, free outlet.
Performance ratings do not include the effects of appurtenances (accessories).
Power rating (BHP) does not include transmission losses.
MODEL TDB
BELT DRIVE TUBEAXIAL DUCT FAN
Max. Motor Frame: 254T
Shaft Size: 1-7/16"
Housing Gauge: 12
Approximate Weight: 310 lbs.
Flange Holes: 8
Diameter Flange Holes: 7/16”
Finish: Epoxy Coated
Galvanized
A B C D E B.C.D.
34-3/8 38-9/16 27 28-5/8 37 36-3/8
A: ID B: OD C: Length E: Max. Height
D
D
E
A
B
B.C.D.
.436
Dia.
C
Front View
Side View
Air Flow