Specification Sheet

426
GC_DA_0111 January 2011
MODEL OVERVIEW
The S&P COMPACT DUCT AXIAL FANS feature, as the name suggests, an extremely compact design
created by the combination of an external rotor motor matched with a direct drive wrap around an impel-
ler hub. This very low prole design optimizes airow performance while minimizing noise generation.
The S&P COMPACT DUCT AXIAL FANS are designed to be installed in-line with inducted or partially
ducted ventilation systems for exhaust or supply air applications.
All S&P COMPACT DUCT AXIAL FANS feature cylindrical anged casings manufactured from a high
grade rolled galvanized steel plate. The motor and impeller assembly are rmly supported within the
casing by a strong steel support frame. All models are supplied with a prewired junction box located on
the outside of the fan casing for easy wiring access. This terminal box protects all wiring connections
against the ingress of dust and moisture. The entire assembly is protected by a two stage primer and a
tough corrosion and UV resistant polyester paint nish.
5 year fan housing and motor warranty
MODEL DA
COMPACT DUCT AXIAL FAN
MODEL FEATURES
• Exhaust air up to 4,750 CFM with static pressure capabilities to .35” w.g.
• Constructed from die cast aluminum and nished in a black polyester paint coating
• All models include asynchronous induction capacitor run and start motors
• Low prole design
• Class F motor insulation
Model DA is available
in our Quickship program.
All sizes are available for next
day shipping from stock.
All specications are subject to change without notice unless approved in submittal by Soler & Palau.