Specification Sheet

60
MODEL TRC
TOTAL RECOVERY FOR ALL CLIMATES -
COMMERCIAL APPLICATIONS
MODEL FEATURES
• MERV-8 lters
• Non-Fused disconnect
• Transformer/relay package allowing simple on/off control
• Access doors for easy access to blowers, core and lters
• Fully insulated case
• Large cores for high efciency
• No condensate pan or drain required
MODEL OVERVIEW
With S&P’s TRC (total recovery for commercial applications) Series for all climates, stale room air
is exhausted and fresh outdoor air is brought back into the building. With this line of ERVs (Energy
Recovery Ventilators) these two air streams are directed through a highly developed “air-to-air” energy
exchange core. The air streams are physically separated by many layers of “plates” so there is no
mixing or contamination of the fresh air. The plates are made of an engineered “resin” material that
simultaneously transfers heat by conduction and humidity by attracting and moving water vapor from
one air stream to the other.
S&P’s TRCs moderate extremes in both temperature and humidity, creating a comfortable indoor
environment. The unique moisture transfer capability of the S&P core also eliminates condensation
and frost build up in most applications. Unlike other ERVs on the market no mechanical or electrical
defrost systems are needed, which means higher heat recovery efciencies, easier installation and
more reliable operation.
10-year industry best core warranty. 2-year warranty on balance of unit.
All specications are subject to change without notice unless approved in submittal by Soler & Palau.
Model TRC is available
in our Quickship program.
All sizes are available for next
day shipping from stock.
GC_TRC_1014 October 2014