Specification Sheet

70
MODEL CRT
OUTDOOR CABINET WITH CORES
MODEL FEATURES
• MERV-8 lters
• Fully insulated case
• Large cores for high efciency
• No condensate pan or drain required
• AHRI Certied
• Rainhood included
• Access door for easy maintenance and Cleaning
• Integral lifting lugs
MODEL OVERVIEW
10-year industry best core warranty. 2-year warranty on balance of unit.
All specications are subject to change without notice unless approved in submittal by S&P USA.
MODEL OVERVIEW
The Models CRT consist of an insulated sheet metal cabinet with 2, 3 or 4 ERV cores and MERV 8
lters. These roof mounted cabinets are designed for retrot or new construction applications where
space for an ERV does not meet the requirements. The CRT provides cost effective energy recovery
with the exibility in location of the supply and exhaust blowers.
STANDARD FEATURES
• G5 - AHRI Certied performance data for efciency and cross leakage
• Ten year core performance warranty
• No liquid water (condensate) or accompanying drain line to deal with - as with many competing
brands
• Hinged and latched access door to ERV cores with airtight outdoor exposure compression seals
• Built-in pressure ports with captive plugs allowing cross-core pressure measurement and accurate
airow measurement
• Rainhood standard, ships assembled with unit
• One inch thick dense berboard insulation with scrimmed foil facing - washable, durable and easy
to maintain - no loose insulation bers to break off and enter the airstreams
• UL tested ammability and smoke generation that meets NFPA 90A and 90B test standards for
commercial applications
• MERV 8, 2" pleated, 20"x20" nominal size lters as follows:
• C2XRT: Four total, two for each airstream
• C3XRT: Six total, three for each airstream
• C4XRT: Eight total, four for each airstream