Specification Sheet

75
MODEL HR
HEAT RECOVERY VENTILATORS
MODEL FEATURES
• Polypropylene HRV core
• 3 operating modes
• Painted galvanized steel case
• Designed for simple installation by a single person
• Fully insulated case
• Limited lifetime warranty on the heat recovery core
• 5-year warranty on balance of unit
MODEL OVERVIEW
The S&P HR Series heat recovery ventilators (HRVs) are ideal for use in cold climates where home
heating is essential. The HR Series uses one motor to exhaust stale room air and another motor to
bring fresh outdoor air back into the house. The technology of a plate heat recovery core is that it
transfers warm ambient air from one airstream to the other without mixing the air streams for maximum
efciency and comfort.
The HR Series has been engineered & designed to improve indoor air quality by reducing excess
humidity or other contaminants during the winter time, and replacing this air by fresh ltered air from
the outdoors. During colder seasons, the units heat recovery core (polypropylene core) will reclaim the
heat from the outgoing stale air and use this heat to temper the incoming fresh air, which reduces the
cost of effectively ventilating the home during winter. This process is reversed in the summer months.
Limited Lifetime core warranty. 5-year warranty on balance of unit.
All specications are subject to change without notice unless approved in submittal by Soler & Palau.
Model HR is available
in our Quickship program.
All sizes are available for next
day shipping from stock.
GC_HR_0114 January 2012