User manual

INSTALLATION
SELECTING THE LOCATION
Place the unit in a flat location where the air outlets are not obstructed. Place the unit at least 20” (50cm) away from a wall or
other obstacle.
MOUNTING THE EXHAUST HOSE
Slide the square end of the exhaust duct over the hot air outlet on the back of the unit.
The exhaust hose should be kept as short and straight as possible. Prevent any sharp bends in the exhaust hose, as this will
trap hot exhaust air.
WALL MOUNTING
The hot exhaust air can be vented through the wall or out a window. If mounting in the wall, the height of the hole should be 16
to 50 inches (40cm to 130cm).
6