Instructions / Assembly

Caster Installation is only required for the 30 and 45 pint models.
(The 70 Pint model includes pre-installed casters.)
1) To install casters on the 30 or 45 pint model, remove the bucket from the dehumidifier. (Fig. 1)
2) Remove and open the box containing the casters from inside the bucket. (Fig. 2)
3) Tilt the dehumidifier no more than 45⁰ and forcibly insert the casters. Make sure the ring around the
caster is flush against the bottom of the dehumidifier. (Fig. 3)
POWER
BUTTON
INCREASE/DECREASE
ROOM
HUMIDITY LEVEL
TIMER
BUTTON
FILTER
BUTTON
FAN
SPEED
BUTTON
PRESET
MODE
BUTTON
Clean Filter
LED Indicator
Fan Speed
LED Indicators
Child-Lock
LED Indicator
MyHome Mode
LED Indicators
Bucket Full
LED Indicator
Power On
LED Indicator
Digital Humidistat
This button does
not operate or offer
any function
Fig. 1
Timer
LED Indicator
CASTER INSTALLATION
CONTROL PANEL
Fig. 2
Fig. 3
Step 1 Step 2
Step 3