Manual and User Guide

OPERATING INSTRUCTIONS

1) When first operating the dehumidifier, run it in Continuous mode for 24 hours.

2) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

3) Humidity Selection - Press the or buttons to choose the desired relative humidity in the room.

Each press of the button will change the desired room humidity by 5%. The room humidity is selectable

from 35%-80% or continuous. The unit will cycle on and off to maintain the humidity level chosen on the

digital display. If you want the dehumidifier to operate continuously regardless of the room humidity, press

the MODE button until you see “CO” on the digital display. This will enable continuous operation and

the “Continuous” indicator will light up on the control panel.

4) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High,

Medium, and Low. The fan speed can be visually distinguished by the fan speed indicators on the control

panel.

5) Timer Auto On- To program the unit to automatically turn on, press the TIMER button when the unit is

off. Press or to increase or decrease the timer in 30 min increments (.5 hours) up to 10 hours. After 10

hours, each press of the button will increase the timer in 1 hour increments up to 24 hours. Once the

desired time is reached, the unit will automatically turn on.

Timer Auto Shut-Off- To program the unit to automatically turn off, press the TIMER button when the

unit is on. Each press of the or buttons will change the timer setting in 30 min increments ( .5 hours)

up to 10 hours. After 10 hours, each press of the or buttons will increase or decrease the timer in 1

hour increments up to 24 hours. Once the desired time is over, the unit will automatically power off.

NOTE: Fan will continue to run even when the compressor is off. This is normal and allows the unit to

circulate air and operate more efficiently

OPERATING INSTRUCTIONS