6” Stand Fan with Remote Control Model No: FS2-40R-32 Operating Instructions 3072986 FS2-40R-32 © 2006 Soleus Air International
Thank you for choosing a Soleus Air 16” Stand Fan. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan. For your own records, please attach a copy of your sales receipt to this manual.
WARNING: This fan is equipped with a polarized plug (one blade is wider than the other). The plug is intended to fit into a power outlet only one way, with the wide blade in the wide slot. This is a safety feature; if you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG. TECHNICAL SPECIFICATIONS Voltage Rating 115V, 60Hz Power Consumption 55W Unit Size 17.
ASSEMBLY WARNING: DO NOT plug in fan before assembly. Tools required: Phillips screwdriver (not included) Base Assembly: 1. Unscrew the two screws from the neck of the fan head. Slide the neck of the fan head over the pole of the stand, aligning the screw holes. Secure the pole by inserting and tightening the two screws. 2. Turn the stand upside down and place the base over the bottom of the stand. Align the pre-drilled holes on the bottom of the base with the stand.
OPERATING INSTRUCTIONS Using Fan Controls 1. Set the fan on a stable, level surface. 2. Turn the fan on by pressing the POWER/SPEED button on the Control Panel or Remote Control. 3. Adjust the speed setting by pressing the POWER/SPEED on the Control Panel or remote control. 4. Pressing the MODE button on either the fan or the remote will choose the desired wind mode: Standard, Sleep, & Natural. In standard mode the fan operates at a steady speed.
CLEANING & MAINTENANCE 1. Turn the fan off and unplug the unit. 2. Wipe the fan down with a damp cloth for most efficient operation. 3. Air dry the fan completely before use. 4. Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of the unit. 5. Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor housing. Fan Blade Cleaning: • Make certain the fan is unplugged.
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air FS2-40R-32 16” Stand Fan to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc.