Operating Instructions

ASSEMBLY & INSTALLATION (CONT.)

Installing the Chassis into the Cabinet

1. Team lift (two people) the air conditioner chassis and

carefully slide it into the cabinet. Let the front of the air

conditioner hang out approximately 6”.

2. CAUTION:

DO NOT PUSH ON THE CONTROLS OR

FINNED COILS.

3. Be sure the chassis is firmly seated in the back of the

cabinet.

4. Insert all screws removed during window installation

and reattach the front face plate, front panel, and the

air filter. Use the REMOVE CHASSIS instructions and

figures 3-7 on page 7 for reference.

Secure the Air Conditioner

1. Secure the left and right flanges on the lower end sides

of the panel with long screws. (See Fig. 12)

2. Drive locking screws through upper frame holes into

window sash.

Extend the Curtain Panels

1. Carefully raise the window to expose the curtain panel

and panel frame. Extend the curtain panels to fill the

window opening.

Place the curtain lock between the curtain extentions

and the window sill, drive locking screws through the

lock and into the sill.

Fig. 12