Operating Instructions

INSTALLATION & ASSEMBLY INSTRUCTIONS - WINDOW MOUNTING

REMOVE CHASSIS

1. Pull down the front panel and remove the filter. (See Fig. 3)

2. Lift the front panel upwards to remove and place to the side.

3. Locate the four faceplate screws and remove. These screws will need to be re-installed prior to mounting the air con-

ditioner. (See Fig. 4)

4. After removing the screws, gently pull away the faceplate from the air conditioner cabinet. Remove the ground screw

and save for reinstallation later. (See Fig. 5 & 6)

5. Remove the two screws from top of the unit. (See Fig. 7) Hold the cabinet while pulling on the base handle, and care-

Fig. 3

Fig. 4

Fig. 5

Fig. 6

fully remove the unit.

Fig. 7