Operating Instructions

ASSEMBLY & INSTALLATION (CONT.)
Placing the Cabinet Inside the Window
1. Open the window and place the cabi
net in the middle
of the window sill.
2. Make sure the bottom rail is seated over the window
sill as shown below. Bring the window down temporar-
ily behind the top mounting rail to hold the cabinet in
3. Fasten cabinet to window sill using three Long Screws.
Pre-drill holes if needed. Add the bottom rail seal over
the screws. (See Fig. 11)
Top Angle Rail and Side Bracket Installation
1. Place the air conditioner on a hard flat surface.
2. Locate the top
mounting rail.
3. Attach the top mounting rail to the unit with short
screws. (See Fig. 8) Higher side of the rail to be
4. Insert top and bottom legs of window filler panel frame
into channel in the top angle and bottom rail. Do both
sides. Install side retainer to cabinet. (See Fig. 9)
Fig. 8
SILL
STOOL
ANGLE
LONG SCREW 

8
facing inside the room.
5. Fasten the curtains to the unit with short screws.
(See Fig. 10)
Fig. 9
Fig. 10
Fig. 11
place.
TOP MOUNTING
RAIL