Specification
General Characteristics of Solidfoor™ engineered ooring
General features:
This document species engineered wooden ooring manufactured from natural materials, suitable for indoor use as oorcovering
under the required (normal dry) climatic conditions.
Wooden ooring in this document is considered as ‘a laminated construction with a top layer of solid wood on a basis of additional
layer(s) of wood, or wood-based materials, glued together’.
The cross laminated construction minimizes the possibility of the wood to move (shrink or swell) under changing climatic conditions.
Suitable for use in normal interior (RH) humidity Levels.
The ooring is suitable for installation by means of the following methods:
Floating
Glued down
Stapled down
General grading:
Specic rules for Classication and Grading are given in below tables
In general, all used timber for Solidoor wood ooring must be sound and free from mould, decay or rot . There will be variations from
panel to panel , but the total impression of the installed oor shall show a homogeneous character of each classication.
Please note that no two oors (or even panels) are the same!
The oors pictured or sampled are an example of the look that may be expected from each classication or grade, and in no way are
intended to provide an exact look of the installed oor.
Oil nishing of wood surfaces
As far as applicable, Solidoor engineered ooring has been prenished with industrial oil. The majority of Solidoor (Level 1) is based
on a combination of vegetable oil components, isoparan solvent and unleaded drying agents, especially developed for production of
hardwearing wooden oors. It means that the wood is impregnated with oil as deep inside the grain as possible, without leaving a visual
coating lm of oil on the surface, which produces a special natural look and touch. The optical eect of gloss Level will be ‘silky matt’.
For these oors it is essential to treat your oor with an extra layer of Solidoor oil or Solidoor Ultimate Hardwax oil immediately after
installation. For this, your oor must be clean and dust-free. Do not use the Solidoor woodcleaner this rst time. Apply only a thin layer
of oil. If this is not sucient then repeat this.
Another segment of the Solidoor range is industrial treated with High Solid oil (Level 2). These oors do not require any application
directly after installation. Cleaning with Solidoor wood cleaner is however recommended. The rst maintenance treatment has to be
done when desired. If the oor is well maintained, you should not need to do this more than once a year. But do not wait until the oil
coating is worn or abraded before maintaining your oor.
Note: In order to ensure a lasting pleasure of the oiled oor, it is necessary to correctly treat the oor directly after rst installation. With
the right care and maintenance, the oiled oor will become increasingly easy to clean and more hardwearing as the wood cleaning pro-
tects the oor with an invisible lm, making the oor more resistant to dirt. The right maintenance for oiled wood surfaces are provided
in our Solidoor maintenance instructions.
Glue bonding:
Glues used are all Class 1: dry interior EN 314-2.
Formaldehyde emission:
Emission class: E1 in accordance with EN 14342
Packaging and Marking
Packs shall have labels on the head of the pack, mentioning:
• Article number
• Commercial name and/or treatment steps of the relevant design
• Size of the article
• Barcode
• Content per pack (in pcs and m2)
Solidoor VINTAGE New Hampshire
2