Instructions

1 min.
R1
1x
Cl
2
AQUA-CHECKAQUA-CHECK
www.aqua-check.de
You will nd important information on your measurement value at www.aqua-check.de.
Please observe the safety notes for handling chemicals (see rear).
Chlorine test
For fresh and salt water
Test preparation:
1 Fill both tubes up to the mark with the test water.
2 Add 1 big level measuring spoon of Cl
2
to one of
the two tubes (test), close with the screw top lid
and dissolve by shaking.
Leave standing for 1 minute.
Measuring with AQUA-CHECK:
1 Reference measurement.
2 Test measurement.