User's Manual

Page 60
To configure Dynamic DNS on the SonicWALL UTM appliance, perform these steps:
1. On the Network > Dynamic DNS page, click the Add button. The Add DDNS
Profile window is displayed.
2. If Enable this DDNS Profile is selected, the profile is administratively enabled, and
the SonicWALL UTM appliance takes the actions defined in the Online Settings
section on the Advanced tab.
3. If Use Online Settings is selected, the profile is administratively online.
4. Enter a name to assign to the DDNS entry in the Profile Name field. This can be any
value used to identify the entry in the Dynamic DNS Settings table.
5. In the Profile page, select the Provider from the drop-down list at the top of the
page. This example uses DynDNS.org. Dyndns.org requires the selection of a
service. This example assumes you have created a dynamic service record with
dyndns.org.
6. Enter your dyndns.org username and password in the User Name and Password
fields.