User's Manual

SonicWALL SSL-VPN 2000 Getting Started Guide Page 61
7. Enter the fully qualified domain name (FQDN) of the hostname you registered with
dyndns.org. Make sure you provide the same hostname and domain as you
configured.
8. You may optionally select Enable Wildcard and/or configure an MX entry in the Mail
Exchanger field.
9. Click the Advanced tab. You can typically leave the default settings on this page.
10. The On-line Settings section provides control over what address is registered with
the dynamic DNS provider. The options are:
Let the server detect IP Address - The dynamic DNS provider determines the IP
address based upon the source address of the connection. This is the most common
setting.
Automatically set IP Address to the Primary WAN Interface IP Address - This
will cause the SonicWALL device to assert its WAN IP address as the registered IP
address, overriding auto-detection by the dynamic DNS server. Useful if detection is
not working correctly.
Specify IP Address manually - Allows for the IP address to be registered to be
manually specified and asserted.
11. The Off-line Settings section controls what IP Address is registered with the
dynamic DNS service provider if the dynamic DNS entry is taken off-line locally
(disabled) on the SonicWALL. The options are:
Do nothing - the default setting. This allows the previously registered address to
remain current with the dynamic DNS provider.
Use the Off-Line IP Address previously configured at Provider’s site - If your provider
supports manual configuration of Off-Line Settings, you can select this option to use
those settings when this profile is taken administratively offline.
12. Click the OK button.