User's Manual

SonicWALL SSL-VPN 2000 Getting Started Guide Page 7

Configuring Your SonicWALL SSL-VPN 2000

Once your SonicWALL SSL-VPN 2000 is connected to a computer through the

management port (X0), it can be configured through the Web-based management

interface.

This section includes the following subsections:

• “Setting Your Administrator Password” on page 7

• “Adding a Local User” on page 8

• “Setting Time Zone” on page 9

• “Configuring SSL-VPN Network Settings” on page 9

• “Configuring DNS / WINS” on page 9

• “Configuring the X0 IP address for Scenario B and Scenario C” on page 10

• “Configuring a Default Route” on page 11

• “Adding a NetExtender Client Route” on page 12

Setting Your Administrator Password

1. Navigate to the Users > Local Users page

2. Click the Configure button corresponding to the “admin” account.

Note: Changing your password from the factory default is optional but strongly

recommended. If you do change your password, be sure to keep it in a safe place. If you

lose your password, you will have to reset the SonicWALL SSL-VPN 2000 to factory

settings, losing your configuration.

