Operation Manual

English

Format

24HR

12HR

3. You can reach the desired time format by pressing the UP or DOWN button.

4. To conrm the entry, press the menu button.

5. To exit the menu, press the BACK button repeatedly until you have returned to the desired

menu item or wait approx. 10 seconds until the device automatically returns to the start

menu.

7.4 Setting the time

The time shown in the display can be set through the setup menu.

This function is also available in the stand-by mode of the device.

1. Press the menu button of the elements W or the remote control for a long time until the

setup menu appears.

2. Select the clock entry by pressing the UP or DOWN buttons and conrm the entry by pres-

sing the menu button again. Now select time and conrm your selection again by pressing

the menu button. You will now see a split display with an actual and a desired value. The

actual one shows the time that is currently set while the desired one shows the time that will

be set.

Clock Settings

12:00

20:00

Now

Set

3. The rst two digits are the hours. These ash when the menu is accessed. In order to set the

hours, select the current hour with the UP or DOWN buttons. To conrm the entry, press the

menu button.

4. In order to set the minutes, select the current minutes with the UP or DOWN buttons. To

conrm the entry, press the menu button one more time.

5. Now the device automatically returns to the previous menu. To exit the menu, press the

BACK button repeatedly until you have returned to the desired menu item or wait approx. 10

seconds until the device automatically returns to the start menu.