Operation Manual

English

1. If you switch the device to the iRadio mode for the rst time or previously switched it back,

the device rst has to be set up for Internet radio reception.

2. This is mostly an automated process. But there are situations in which user entries are

required.

3. When you start the device for the rst time, it rst tries to nd a network. The display rst

shows “Please wait”, followed by the search for a network (Initializing network). Here it rst

attempts to establish a connection through a wireless network (WLAN) (network search

1-28).

4. If a wireless network is found, the network name (SSID) is shown on the display. If several

wireless networks are found, they appear one after the other in a list. In order to select a par-

ticular wireless network, mark the desired network name with the UP or DOWN button and

conrm the selection by pressing the menu button. If no wireless network is found, please

follow the instructions below under item 8.

5. If the wireless network is encrypted, the message “Enter WPA key” appears after selecting

the wireless network (if using access with WPA encryption) and “Enter WEP key” (if using

access with WEP encryption).

ABC_

12:00

iRadio

< )~ END <>AB >

END

31 2 4

1 Currently set mode (here iRadio)

2 Currently selected symbol (here the nal entry END)

3 Line with symbols that precede or follow the current selection. The symbol that is at the cen-

ter can be selected by pressing the menu button.

4 Already selected symbols. These represent the key that has to be entered.

NOTE

The following symbols are available for the entry of a network key:

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz

0123456789<|=>+ -_!?@#$%^&*:;`´“.,\ /[]{}()~ END

END completes the entry of the key.

Please observe the lower and upper cases of the letters!

6. Below you have the option of entering the key for the selected network. Select the desired

symbol with the UP or DOWN buttons and conrm your selection by pressing the menu but-

ton. You can change incorrect entries by pressing the BACK button. You can see the current

symbol in the top left corner below the iRadio lettering. Complete your entry by selecting

END and conrm the entry by pressing the menu button.

7. If no wireless network is available, the device automatically searches for a network through