Operation Manual

48
12.4.4 Clearing the playback
This option deletes all of the stored playlists from the memory of the device.
12.5 Settings
In this menu you have the option of customizing the various settings of your iRadio according to
your preferences.
12.5.1 Network settings
Show config.
In this menu you can receive information about the currently set values.
Mode: AUTO / DHCP
WLAN MAC address
Cable MAC address
current IP address
type of cable-connected device
type of WLAN device
change config.
In this menu you have the option of customizing the various network settings.
CAUTION
Only change the following settings if you know exactly what you are doing.
Otherwise there is the possibility that your device will not be able to connect to a
network anymore. If you make any incorrect settings, you can restore the device
to the factory settings.
Auto (DHCP)
This function enables the automatic assignment of an IP address through a DHCP server.
Select YES to leave this function with the setting of an automatic IP assignment. Now your
elements W will try to establish a connection to a network.
Select NO for the manual entry of an IP address. Conrm your selection by pressing the
menu button.
When selecting NO, the repeated pressing of the menu button will return you to the input
mask for the IP address.
Use the UP or DOWN buttons to select the desired digit and conrm your selection by
pressing the menu button. You will then reach the next digit. Continue this process until
you have entered the desired IP address. The BACK button will return you to the previous
digit.
When you have successfully entered the IP address, you will be prompted to enter rst the
network mask and then the gateway in the same way. Conrm each of your selections by
pressing the menu button.
Next you will have the option of making a DNS server entry. After conrming the DNS