Operation Manual
English
79
7. Setting the basic functions
1. Switch on the device by briey touching the sonoro lettering.
2. Press the menu button of the elements W or the remote control for a long time until the
setup menu appears.
The display shows the following information in the setup menu:
Setup Menu
Audio
Sleep Timer
Clock
Dimmer
The arrow refers to additional entries in the list.
3. Switch to the desired menu entry by pressing the UP or DOWN button.
4. In order to open the selected menu entry, briey press the menu button again and perform
the settings.
5. To change to the next higher menu or leave the setup menu, press the BACK button.
NOTE
If you stop adjusting the settings for about 10 seconds, the setup menu closes
and the display will return to its original mode.
7.1 Setting the display language
The language of the menus as well as the playback display can be customized.
1. Press the menu button of the elements W or the remote control for a long time until the
setup menu appears.
2. Select the language entry by pressing the UP or DOWN buttons and conrm the entry by
pressing the menu button again.
3. Here you can choose between German and English. Select the desired language and press
the menu button to conrm. Please note that the language of the iRadio module can be
Language
English
Deutsch